Sharpening Services

Drop off your blades at our shop. All blades get safely packed and shipped to our sharpening partner every Friday morning.

All blades are cleaned in an ultrasonic bath and wire brushed with a nylon wheel. The ultrasonic bath helps loosen debris and the nylon wire wheel helps clear any surface debris away from the tooth without damaging the tooth like a steel wire wheel brush would.

Once cleaned, your blades are measured up and sorted into a work flow for one of the 6 CNC saw grinders. We inspect blades prior to going on our machine. We note significant run out and mark it on the blade so that we can correctly grind your blade into proper shape. Any blade needing tip work or that cannot be ground, are weeded out at this point in the process.

Your blades are top and face ground. We have 2 dedicated top grinding machines, 1 dedicated facing machine and 3 machines that can do both grinds in a single cycle. Once ground, we again visually inspect the blade, as well as checking for any run out. Blades are to have 95% of the teeth within .002″ tolerance, and no two teeth can be more than .004″ apart in height.

Blades are dipped in a wax protective coating prior to shipping back. If you sent your blades in boxes, or a special case, you will receive these back. If not, your blades are shipped in our custom boxes designed for saw blade shipping and are separated by cardboard dividers custom made to fit the profile of our shipping box.